»SSH Secrets Engine (API)

This is the API documentation for the Vault SSH secrets engine. For general information about the usage and operation of the SSH secrets engine, please see the SSH documentation.

This documentation assumes the SSH secrets engine is enabled at the /ssh path in Vault. Since it is possible to enable secrets engines at any location, please update your API calls accordingly.

»Create/Update Key

This endpoint creates or updates a named key.

»Parameters

• name (string: <required>) – Specifies the name of the key to create. This is part of the request URL.

• key (string: <required>) – Specifies an SSH private key with appropriate privileges on remote hosts.

»Sample Payload

{
  "key": "..."
}

{  "key": "..."}

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/ssh/keys/my-key

$ curl \    --header "X-Vault-Token: ..." \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/ssh/keys/my-key

»Delete Key

This endpoint deletes a named key.

»Parameters

• name (string: <required>) – Specifies the name of the key to delete. This is part of the request URL.

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request DELETE \
    http://127.0.0.1:8200/v1/ssh/keys/my-key

$ curl \    --header "X-Vault-Token: ..." \    --request DELETE \    http://127.0.0.1:8200/v1/ssh/keys/my-key

»Create Role

This endpoint creates or updates a named role.

»Parameters

• name (string: <required>) – Specifies the name of the role to create. This is part of the request URL.

• key (string: "") – Specifies the name of the registered key in Vault. Before creating the role, use the keys/ endpoint to create a named key. This is required for "Dynamic Key" type.

• admin_user (string: "") – Specifies the admin user at remote host. The shared key being registered should be for this user and should have root or sudo privileges. Every time a dynamic credential is generated for a client, Vault uses this admin username to login to remote host and install the generated credential. This is required for Dynamic Key type.

• default_user (string: "") – Specifies the default username for which a credential will be generated. When the endpoint creds/ is used without a username, this value will be used as default username. Its recommended to create individual roles for each username to ensure absolute isolation between usernames. This is required for Dynamic Key type and OTP type.

  For the CA type, if you wish this to be a valid principal, it must also be in allowed_users.

• cidr_list (string: "") – Specifies a comma separated list of CIDR blocks for which the role is applicable for. It is possible that a same set of CIDR blocks are part of multiple roles. This is a required parameter, unless the role is registered under the /config/zeroaddress endpoint.

• exclude_cidr_list (string: "") – Specifies a comma-separated list of CIDR blocks. IP addresses belonging to these blocks are not accepted by the role. This is particularly useful when big CIDR blocks are being used by the role and certain parts need to be kept out.

• port (int: 22) – Specifies the port number for SSH connection. Port number does not play any role in OTP generation. For the otp secrets engine type, this is just a way to inform the client about the port number to use. The port number will be returned to the client by Vault along with the OTP.

• key_type (string: <required>) – Specifies the type of credentials generated by this role. This can be either otp, dynamic or ca.

• key_bits (int: 1024) – Specifies the length of the RSA dynamic key in bits. This can be either 1024 or 2048.

• install_script (string: "") – Specifies the script used to install and uninstall public keys in the target machine. Defaults to the built-in script.

• allowed_users (string: "") – If this option is not specified, or if it is *, the client can request a credential for any valid user at the remote host, including the admin user. If only certain usernames are to be allowed, then this list enforces it. If this field is set, then credentials can only be created for default_user and usernames present in this list. Setting this option will enable all the users with access this role to fetch credentials for all other usernames in this list. Use with caution. N.B.: if the type is ca, an empty list does not allow any user; instead you must use * to enable this behavior.

• allowed_users_template (bool: false) - If set, allowed_users can be specified using identity template policies. Non-templated users are also permitted.

• allowed_domains (string: "") – The list of domains for which a client can request a host certificate. If this option is explicitly set to "*", then credentials can be created for any domain. See also allow_bare_domains and allow_subdomains.

• key_option_specs (string: "") – Specifies a comma separated option specification which will be prefixed to RSA keys in the remote host's authorized_keys file. N.B.: Vault does not check this string for validity.

• ttl (string: "") – Specifies the Time To Live value provided as a string duration with time suffix. Hour is the largest suffix. If not set, uses the system default value or the value of max_ttl, whichever is shorter.

• max_ttl (string: "") – Specifies the maximum Time To Live provided as a string duration with time suffix. Hour is the largest suffix. If not set, defaults to the system maximum lease TTL.

• allowed_critical_options (string: "") – Specifies a comma-separated list of critical options that certificates can have when signed. To allow any critical options, set this to an empty string. Will default to allowing any critical options.

• allowed_extensions (string: "") – Specifies a comma-separated list of extensions that certificates can have when signed. To allow any extensions, set this to an empty string. Will default to allowing any extensions. For the list of extensions, take a look at the sshd manual's AUTHORIZED_KEYS FILE FORMAT section. You should add a permit- before the name of extension to allow it.

• default_critical_options (map<string|string>: "") – Specifies a map of critical options certificates should have if none are provided when signing. This field takes in key value pairs in JSON format. Note that these are not restricted by allowed_critical_options. Defaults to none.

• default_extensions (map<string|string>: "") – Specifies a map of extensions certificates should have if none are provided when signing. This field takes in key value pairs in JSON format. Note that these are not restricted by allowed_extensions. Defaults to none.

• allow_user_certificates (bool: false) – Specifies if certificates are allowed to be signed for use as a 'user'.

• allow_host_certificates (bool: false) – Specifies if certificates are allowed to be signed for use as a 'host'.

• allow_bare_domains (bool: false) – Specifies if host certificates that are requested are allowed to use the base domains listed in allowed_domains, e.g. "example.com". This is a separate option as in some cases this can be considered a security threat.

• allow_subdomains (bool: false) – Specifies if host certificates that are requested are allowed to be subdomains of those listed in allowed_domains, e.g. if "example.com" is part of allowed_domains, this allows "foo.example.com".

• allow_user_key_ids (bool: false) – Specifies if users can override the key ID for a signed certificate with the "key_id" field. When false, the key ID will always be the token display name. The key ID is logged by the SSH server and can be useful for auditing.

• key_id_format (string: "") – When supplied, this value specifies a custom format for the key id of a signed certificate. The following variables are available for use: '{{token_display_name}}' - The display name of the token used to make the request. '{{role_name}}' - The name of the role signing the request. '{{public_key_hash}}' - A SHA256 checksum of the public key that is being signed. e.g. "custom-keyid-{{token_display_name}}"

• allowed_user_key_lengths (map<string|int>: "") – Specifies a map of ssh key types and their expected sizes which are allowed to be signed by the CA type.

• algorithm_signer (string: "") - Algorithm to sign keys with. Valid values are ssh-rsa, rsa-sha2-256, and rsa-sha2-512. Note that ssh-rsa is now considered insecure and is not supported by current OpenSSH versions. If not specified, it will use the signer's default algorithm.

»Sample Payload

{
  "key_type": "otp"
}

{  "key_type": "otp"}

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/ssh/roles/my-role

$ curl \    --header "X-Vault-Token: ..." \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/ssh/roles/my-role

»Read Role

This endpoint queries a named role.

»Parameters

• name (string: <required>) – Specifies the name of the role to read. This is part of the request URL.

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    http://127.0.0.1:8200/v1/ssh/roles/my-role

$ curl \    --header "X-Vault-Token: ..." \    http://127.0.0.1:8200/v1/ssh/roles/my-role

»Sample Response

For a dynamic key role:

{
  "admin_user": "username",
  "cidr_list": "x.x.x.x/y",
  "default_user": "username",
  "key": "<key name>",
  "key_type": "dynamic",
  "port": 22
}

{  "admin_user": "username",  "cidr_list": "x.x.x.x/y",  "default_user": "username",  "key": "<key name>",  "key_type": "dynamic",  "port": 22}

For an OTP role:

{
  "cidr_list": "x.x.x.x/y",
  "default_user": "username",
  "key_type": "otp",
  "port": 22
}

{  "cidr_list": "x.x.x.x/y",  "default_user": "username",  "key_type": "otp",  "port": 22}

For a CA role:

{
  "allow_bare_domains": false,
  "allow_host_certificates": true,
  "allow_subdomains": false,
  "allow_user_key_ids": false,
  "allow_user_certificates": true,
  "allowed_critical_options": "",
  "allowed_extensions": "",
  "default_critical_options": {},
  "default_extensions": {},
  "max_ttl": "768h",
  "ttl": "4h"
}

{  "allow_bare_domains": false,  "allow_host_certificates": true,  "allow_subdomains": false,  "allow_user_key_ids": false,  "allow_user_certificates": true,  "allowed_critical_options": "",  "allowed_extensions": "",  "default_critical_options": {},  "default_extensions": {},  "max_ttl": "768h",  "ttl": "4h"}

»List Roles

This endpoint returns a list of available roles. Only the role names are returned, not any values.

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request LIST \
    http://127.0.0.1:8200/v1/ssh/roles

$ curl \    --header "X-Vault-Token: ..." \    --request LIST \    http://127.0.0.1:8200/v1/ssh/roles

»Sample Response

{
  "auth": null,
  "data": {
    "keys": ["dev", "prod"],
    "key_info": {
      "dev": {
        "key_type": "ca"
      },
      "prod": {
        "key_type": "dynamic"
      }
    }
  },
  "lease_duration": 2764800,
  "lease_id": "",
  "renewable": false
}

{  "auth": null,  "data": {    "keys": ["dev", "prod"],    "key_info": {      "dev": {        "key_type": "ca"      },      "prod": {        "key_type": "dynamic"      }    }  },  "lease_duration": 2764800,  "lease_id": "",  "renewable": false}

»Delete Role

This endpoint deletes a named role.

»Parameters

• name (string: <required>) – Specifies the name of the role to delete. This is part of the request URL.

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request DELETE \
    --data @payload.json \
    http://127.0.0.1:8200/v1/ssh/roles/my-role

$ curl \    --header "X-Vault-Token: ..." \    --request DELETE \    --data @payload.json \    http://127.0.0.1:8200/v1/ssh/roles/my-role

»List Zero-Address Roles

This endpoint returns the list of configured zero-address roles.

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    http://127.0.0.1:8200/v1/ssh/config/zeroaddress

$ curl \    --header "X-Vault-Token: ..." \    http://127.0.0.1:8200/v1/ssh/config/zeroaddress

»Sample Response

{
  "lease_id": "",
  "renewable": false,
  "lease_duration": 0,
  "data": {
    "roles": ["otp_key_role"]
  },
  "warnings": null,
  "auth": null
}

{  "lease_id": "",  "renewable": false,  "lease_duration": 0,  "data": {    "roles": ["otp_key_role"]  },  "warnings": null,  "auth": null}

»Configure Zero-Address Roles

This endpoint configures zero-address roles.

»Parameters

• roles (string: <required>) – Specifies a string containing comma separated list of role names which allows credentials to be requested for any IP address. CIDR blocks previously registered under these roles will be ignored.

»Sample Payload

{
  "roles": ["otp_key_role"]
}

{  "roles": ["otp_key_role"]}

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/ssh/config/zeroaddress

$ curl \    --header "X-Vault-Token: ..." \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/ssh/config/zeroaddress

»Delete Zero-Address Role

This endpoint deletes the zero-address roles configuration.

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request DELETE \
    http://127.0.0.1:8200/v1/ssh/config/zeroaddress

$ curl \    --header "X-Vault-Token: ..." \    --request DELETE \    http://127.0.0.1:8200/v1/ssh/config/zeroaddress

»Generate SSH Credentials

This endpoint creates credentials for a specific username and IP with the parameters defined in the given role.

»Parameters

• name (string: <required>) – Specifies the name of the role to create credentials against. This is part of the request URL.

• username (string: "") – Specifies the username on the remote host.

• ip (string: <required>) – Specifies the IP of the remote host.

»Sample Payload

{
  "ip": "1.2.3.4"
}

{  "ip": "1.2.3.4"}

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/ssh/creds/my-role

$ curl \    --header "X-Vault-Token: ..." \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/ssh/creds/my-role

»Sample Response

For a dynamic key role:

{
  "lease_id": "",
  "renewable": false,
  "lease_duration": 0,
  "data": {
    "admin_user": "rajanadar",
    "allowed_users": "",
    "cidr_list": "x.x.x.x/y",
    "default_user": "rajanadar",
    "exclude_cidr_list": "x.x.x.x/y",
    "install_script": "pretty_large_script",
    "key": "5d9ee6a1-c787-47a9-9738-da243f4f69bf",
    "key_bits": 1024,
    "key_option_specs": "",
    "key_type": "dynamic",
    "port": 22
  },
  "warnings": null,
  "auth": null
}

{  "lease_id": "",  "renewable": false,  "lease_duration": 0,  "data": {    "admin_user": "rajanadar",    "allowed_users": "",    "cidr_list": "x.x.x.x/y",    "default_user": "rajanadar",    "exclude_cidr_list": "x.x.x.x/y",    "install_script": "pretty_large_script",    "key": "5d9ee6a1-c787-47a9-9738-da243f4f69bf",    "key_bits": 1024,    "key_option_specs": "",    "key_type": "dynamic",    "port": 22  },  "warnings": null,  "auth": null}

For an OTP role:

{
  "lease_id": "sshs/creds/c3c2e60c-5a48-415a-9d5a-a41e0e6cdec5/3ee6ad28-383f-d482-2427-70498eba4d96",
  "renewable": false,
  "lease_duration": 2764800,
  "data": {
    "ip": "127.0.0.1",
    "key": "6d6411fd-f622-ea0a-7e2c-989a745cbbb2",
    "key_type": "otp",
    "port": 22,
    "username": "rajanadar"
  },
  "warnings": null,
  "auth": null
}

{  "lease_id": "sshs/creds/c3c2e60c-5a48-415a-9d5a-a41e0e6cdec5/3ee6ad28-383f-d482-2427-70498eba4d96",  "renewable": false,  "lease_duration": 2764800,  "data": {    "ip": "127.0.0.1",    "key": "6d6411fd-f622-ea0a-7e2c-989a745cbbb2",    "key_type": "otp",    "port": 22,    "username": "rajanadar"  },  "warnings": null,  "auth": null}

»List Roles by IP

This endpoint lists all of the roles with which the given IP is associated.

»Parameters

• ip (string: <required>) – Specifies the IP of the remote host.

»Sample Payload

{
  "ip": "1.2.3.4"
}

{  "ip": "1.2.3.4"}

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/ssh/lookup

$ curl \    --header "X-Vault-Token: ..." \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/ssh/lookup

»Sample Response

An array of roles as a secret structure.

{
  "lease_id": "",
  "renewable": false,
  "lease_duration": 0,
  "data": {
    "roles": [
      "fe6f61b7-7e4a-46a6-b2c8-0d530b8513df",
      "6d6411fd-f622-ea0a-7e2c-989a745cbbb2"
    ]
  },
  "warnings": null,
  "auth": null
}

{  "lease_id": "",  "renewable": false,  "lease_duration": 0,  "data": {    "roles": [      "fe6f61b7-7e4a-46a6-b2c8-0d530b8513df",      "6d6411fd-f622-ea0a-7e2c-989a745cbbb2"    ]  },  "warnings": null,  "auth": null}

»Verify SSH OTP

This endpoint verifies if the given OTP is valid. This is an unauthenticated endpoint.

»Parameters

• otp (string: <required>) – Specifies the One-Time-Key that needs to be validated.

»Sample Payload

{
  "otp": "bad2b3-..."
}

{  "otp": "bad2b3-..."}

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/ssh/verify

$ curl \    --header "X-Vault-Token: ..." \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/ssh/verify

»Sample Response

{
  "lease_id": "",
  "renewable": false,
  "lease_duration": 0,
  "data": {
    "ip": "127.0.0.1",
    "username": "rajanadar"
  },
  "warnings": null,
  "auth": null
}

{  "lease_id": "",  "renewable": false,  "lease_duration": 0,  "data": {    "ip": "127.0.0.1",    "username": "rajanadar"  },  "warnings": null,  "auth": null}

»Submit CA Information

This endpoint allows submitting the CA information for the secrets engine via an SSH key pair. If you have already set a certificate and key, they will be overridden.

»Parameters

• private_key (string: "") – Specifies the private key part the SSH CA key pair; required if generate_signing_key is false.

• public_key (string: "") – Specifies the public key part of the SSH CA key pair; required if generate_signing_key is false.

• generate_signing_key (bool: true) – Specifies if Vault should generate the signing key pair internally. The generated public key will be returned so you can add it to your configuration.

»Sample Payload

{
  "generate_signing_key": true
}

{  "generate_signing_key": true}

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/ssh/config/ca

$ curl \    --header "X-Vault-Token: ..." \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/ssh/config/ca

»Sample Response

This will return a 204 response if generate_signing_key was unset or false.

This will return a 200 response if generate_signing_key was true:

{
  "lease_id": "",
  "renewable": false,
  "lease_duration": 0,
  "data": {
    "public_key": "ssh-rsa AAAAHHNzaC1y...\n"
  },
  "warnings": null
}

{  "lease_id": "",  "renewable": false,  "lease_duration": 0,  "data": {    "public_key": "ssh-rsa AAAAHHNzaC1y...\n"  },  "warnings": null}

»Delete CA Information

This endpoint deletes the CA information for the backend via an SSH key pair.

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request DELETE \
    http://127.0.0.1:8200/v1/ssh/config/ca

$ curl \    --header "X-Vault-Token: ..." \    --request DELETE \    http://127.0.0.1:8200/v1/ssh/config/ca

»Read Public Key (Unauthenticated)

This endpoint returns the configured/generated public key. This is an unauthenticated endpoint.

»Sample Request

$ curl http://127.0.0.1:8200/v1/ssh/public_key

$ curl http://127.0.0.1:8200/v1/ssh/public_key

»Sample Response

    ssh-rsa AAAAHHNzaC1y...

    ssh-rsa AAAAHHNzaC1y...

»Read Public Key (Authenticated)

This endpoint reads the configured/generated public key.

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    http://127.0.0.1:8200/v1/ssh/config/ca

$ curl \    --header "X-Vault-Token: ..." \    http://127.0.0.1:8200/v1/ssh/config/ca

»Sample Response

{
  "lease_id": "",
  "renewable": false,
  "lease_duration": 0,
  "data": {
    "public_key": "ssh-rsa AAAAHHNzaC1y...\n"
  },
  "warnings": null
}

{  "lease_id": "",  "renewable": false,  "lease_duration": 0,  "data": {    "public_key": "ssh-rsa AAAAHHNzaC1y...\n"  },  "warnings": null}

»Sign SSH Key

This endpoint signs an SSH public key based on the supplied parameters, subject to the restrictions contained in the role named in the endpoint.

»Parameters

• name (string: <required>) – Specifies the name of the role to sign. This is part of the request URL.

• public_key (string: <required>) – Specifies the SSH public key that should be signed.

• ttl (string: "") – Specifies the Requested Time To Live. Cannot be greater than the role's max_ttl value. If not provided, the role's ttl value will be used. Note that the role values default to system values if not explicitly set.

• valid_principals (string: "") – Specifies valid principals, either usernames or hostnames, that the certificate should be signed for.

• cert_type (string: "user") – Specifies the type of certificate to be created; either "user" or "host".

• key_id (string: "") – Specifies the key id that the created certificate should have. If not specified, the display name of the token will be used.

• critical_options (map<string|string>: "") – Specifies a map of the critical options that the certificate should be signed for. Defaults to none.

• extensions (map<string|string>: "") – Specifies a map of the extensions that the certificate should be signed for. Defaults to none.

»Sample Payload

{
  "public_key": "ssh-rsa ..."
}

{  "public_key": "ssh-rsa ..."}

»Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/ssh/sign/my-key

$ curl \    --header "X-Vault-Token: ..." \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/ssh/sign/my-key

»Sample Response

{
  "lease_id": "ssh/sign/example/097bf207-96dd-0041-0e83-b23bd1923993",
  "renewable": false,
  "lease_duration": 21600,
  "data": {
    "serial_number": "f65ed2fd21443d5c",
    "signed_key": "ssh-rsa-cert-v01@openssh.com AAAAHHNzaC1y...\n"
  },
  "auth": null
}

{  "lease_id": "ssh/sign/example/097bf207-96dd-0041-0e83-b23bd1923993",  "renewable": false,  "lease_duration": 21600,  "data": {    "serial_number": "f65ed2fd21443d5c",    "signed_key": "ssh-rsa-cert-v01@openssh.com AAAAHHNzaC1y...\n"  },  "auth": null}