Module netmiko.hp
Source code
from netmiko.hp.hp_procurve import HPProcurveSSH, HPProcurveTelnet
from netmiko.hp.hp_comware import HPComwareSSH, HPComwareTelnet
__all__ = ["HPProcurveSSH", "HPProcurveTelnet", "HPComwareSSH", "HPComwareTelnet"]Sub-modules
netmiko.hp.hp_comwarenetmiko.hp.hp_procurve
Classes
class HPComwareSSH (**kwargs)-
Base Class for cisco-like behavior.
Initialize attributes for establishing connection to target device. :param ip: IP address of target device. Not required if `host` is provided. :type ip: str :param host: Hostname of target device. Not required if `ip` is provided. :type host: str :param username: Username to authenticate against target device if required. :type username: str :param password: Password to authenticate against target device if required. :type password: str :param secret: The enable password if target device requires one. :type secret: str :param port: The destination port used to connect to the target device. :type port: int or None :param device_type: Class selection based on device type. :type device_type: str :param verbose: Enable additional messages to standard output. :type verbose: bool :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1). :type global_delay_factor: int :param use_keys: Connect to target device using SSH keys. :type use_keys: bool :param key_file: Filename path of the SSH key file to use. :type key_file: str :param pkey: SSH key object to use. :type pkey: paramiko.PKey :param passphrase: Passphrase to use for encrypted key; password will be used for key decryption if not specified. :type passphrase: str :param allow_agent: Enable use of SSH key-agent. :type allow_agent: bool :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which means unknown SSH host keys will be accepted). :type ssh_strict: bool :param system_host_keys: Load host keys from the users known_hosts file. :type system_host_keys: bool :param alt_host_keys: If `True` host keys will be loaded from the file specified in alt_key_file. :type alt_host_keys: bool :param alt_key_file: SSH host key file to use (if alt_host_keys=True). :type alt_key_file: str :param ssh_config_file: File name of OpenSSH configuration file. :type ssh_config_file: str :param timeout: Connection timeout. :type timeout: float :param session_timeout: Set a timeout for parallel requests. :type session_timeout: float :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response. :type auth_timeout: float :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko). :type banner_timeout: float :param keepalive: Send SSH keepalive packets at a specific interval, in seconds. Currently defaults to 0, for backwards compatibility (it will not attempt to keep the connection alive). :type keepalive: int :param default_enter: Character(s) to send to correspond to enter key (default:). :type default_enter: str
:param response_return: Character(s) to use in normalized return data to represent enter key (default:) :type response_return: str
:param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor to select smallest of global and specific. Sets default global_delay_factor to .1 (default: False) :type fast_cli: boolean :param session_log: File path or BufferedIOBase subclass object to write the session log to. :type session_log: str :param session_log_record_writes: The session log generally only records channel reads due to eliminate command duplication due to command echo. You can enable this if you want to record both channel reads and channel writes in the log (default: False). :type session_log_record_writes: boolean :param session_log_file_mode: "write" or "append" for session_log file mode (default: "write") :type session_log_file_mode: str :param allow_auto_change: Allow automatic configuration changes for terminal settings. (default: False) :type allow_auto_change: bool :param encoding: Encoding to be used when writing bytes to the output channel. (default: ascii) :type encoding: str :param sock: An open socket or socket-like object (such as a `.Channel`) to use for communication to the target host (default: None). :type sock: socket :param global_cmd_verify: Control whether command echo verification is enabled or disabled (default: None). Global attribute takes precedence over function `cmd_verify` argument. Value of `None` indicates to use function `cmd_verify` argument. :type global_cmd_verify: bool|None :param auto_connect: Control whether Netmiko automatically establishes the connection as part of the object creation (default: True). :type auto_connect: boolSource code
class HPComwareSSH(HPComwareBase): passAncestors
Inherited members
HPComwareBase:check_config_modecheck_enable_modecleanupclear_bufferclose_session_logcommitconfig_modedisable_pagingdisconnectenableestablish_connectionexit_config_modeexit_enable_modefind_promptis_alivenormalize_cmdnormalize_linefeedsopen_session_logparamiko_cleanupread_channelread_until_patternread_until_promptread_until_prompt_or_patternrun_ttpsave_configselect_delay_factorsend_commandsend_command_expectsend_command_timingsend_config_from_filesend_config_setsession_preparationset_base_promptset_terminal_widthspecial_login_handlerstrip_ansi_escape_codesstrip_backspacesstrip_commandstrip_prompttelnet_loginwrite_channel
class HPComwareTelnet (*args, **kwargs)-
Base Class for cisco-like behavior.
Initialize attributes for establishing connection to target device. :param ip: IP address of target device. Not required if `host` is provided. :type ip: str :param host: Hostname of target device. Not required if `ip` is provided. :type host: str :param username: Username to authenticate against target device if required. :type username: str :param password: Password to authenticate against target device if required. :type password: str :param secret: The enable password if target device requires one. :type secret: str :param port: The destination port used to connect to the target device. :type port: int or None :param device_type: Class selection based on device type. :type device_type: str :param verbose: Enable additional messages to standard output. :type verbose: bool :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1). :type global_delay_factor: int :param use_keys: Connect to target device using SSH keys. :type use_keys: bool :param key_file: Filename path of the SSH key file to use. :type key_file: str :param pkey: SSH key object to use. :type pkey: paramiko.PKey :param passphrase: Passphrase to use for encrypted key; password will be used for key decryption if not specified. :type passphrase: str :param allow_agent: Enable use of SSH key-agent. :type allow_agent: bool :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which means unknown SSH host keys will be accepted). :type ssh_strict: bool :param system_host_keys: Load host keys from the users known_hosts file. :type system_host_keys: bool :param alt_host_keys: If `True` host keys will be loaded from the file specified in alt_key_file. :type alt_host_keys: bool :param alt_key_file: SSH host key file to use (if alt_host_keys=True). :type alt_key_file: str :param ssh_config_file: File name of OpenSSH configuration file. :type ssh_config_file: str :param timeout: Connection timeout. :type timeout: float :param session_timeout: Set a timeout for parallel requests. :type session_timeout: float :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response. :type auth_timeout: float :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko). :type banner_timeout: float :param keepalive: Send SSH keepalive packets at a specific interval, in seconds. Currently defaults to 0, for backwards compatibility (it will not attempt to keep the connection alive). :type keepalive: int :param default_enter: Character(s) to send to correspond to enter key (default:). :type default_enter: str
:param response_return: Character(s) to use in normalized return data to represent enter key (default:) :type response_return: str
:param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor to select smallest of global and specific. Sets default global_delay_factor to .1 (default: False) :type fast_cli: boolean :param session_log: File path or BufferedIOBase subclass object to write the session log to. :type session_log: str :param session_log_record_writes: The session log generally only records channel reads due to eliminate command duplication due to command echo. You can enable this if you want to record both channel reads and channel writes in the log (default: False). :type session_log_record_writes: boolean :param session_log_file_mode: "write" or "append" for session_log file mode (default: "write") :type session_log_file_mode: str :param allow_auto_change: Allow automatic configuration changes for terminal settings. (default: False) :type allow_auto_change: bool :param encoding: Encoding to be used when writing bytes to the output channel. (default: ascii) :type encoding: str :param sock: An open socket or socket-like object (such as a `.Channel`) to use for communication to the target host (default: None). :type sock: socket :param global_cmd_verify: Control whether command echo verification is enabled or disabled (default: None). Global attribute takes precedence over function `cmd_verify` argument. Value of `None` indicates to use function `cmd_verify` argument. :type global_cmd_verify: bool|None :param auto_connect: Control whether Netmiko automatically establishes the connection as part of the object creation (default: True). :type auto_connect: boolSource code
class HPComwareTelnet(HPComwareBase): def __init__(self, *args, **kwargs): default_enter = kwargs.get("default_enter") kwargs["default_enter"] = "\r\n" if default_enter is None else default_enter super().__init__(*args, **kwargs)Ancestors
Inherited members
HPComwareBase:check_config_modecheck_enable_modecleanupclear_bufferclose_session_logcommitconfig_modedisable_pagingdisconnectenableestablish_connectionexit_config_modeexit_enable_modefind_promptis_alivenormalize_cmdnormalize_linefeedsopen_session_logparamiko_cleanupread_channelread_until_patternread_until_promptread_until_prompt_or_patternrun_ttpsave_configselect_delay_factorsend_commandsend_command_expectsend_command_timingsend_config_from_filesend_config_setsession_preparationset_base_promptset_terminal_widthspecial_login_handlerstrip_ansi_escape_codesstrip_backspacesstrip_commandstrip_prompttelnet_loginwrite_channel
class HPProcurveSSH (ip='', host='', username='', password=None, secret='', port=None, device_type='', verbose=False, global_delay_factor=1, global_cmd_verify=None, use_keys=False, key_file=None, pkey=None, passphrase=None, allow_agent=False, ssh_strict=False, system_host_keys=False, alt_host_keys=False, alt_key_file='', ssh_config_file=None, conn_timeout=5, auth_timeout=None, banner_timeout=15, blocking_timeout=20, timeout=100, session_timeout=60, keepalive=0, default_enter=None, response_return=None, serial_settings=None, fast_cli=False, session_log=None, session_log_record_writes=False, session_log_file_mode='write', allow_auto_change=False, encoding='ascii', sock=None, auto_connect=True)-
Base Class for cisco-like behavior.
Initialize attributes for establishing connection to target device. :param ip: IP address of target device. Not required if `host` is provided. :type ip: str :param host: Hostname of target device. Not required if `ip` is provided. :type host: str :param username: Username to authenticate against target device if required. :type username: str :param password: Password to authenticate against target device if required. :type password: str :param secret: The enable password if target device requires one. :type secret: str :param port: The destination port used to connect to the target device. :type port: int or None :param device_type: Class selection based on device type. :type device_type: str :param verbose: Enable additional messages to standard output. :type verbose: bool :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1). :type global_delay_factor: int :param use_keys: Connect to target device using SSH keys. :type use_keys: bool :param key_file: Filename path of the SSH key file to use. :type key_file: str :param pkey: SSH key object to use. :type pkey: paramiko.PKey :param passphrase: Passphrase to use for encrypted key; password will be used for key decryption if not specified. :type passphrase: str :param allow_agent: Enable use of SSH key-agent. :type allow_agent: bool :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which means unknown SSH host keys will be accepted). :type ssh_strict: bool :param system_host_keys: Load host keys from the users known_hosts file. :type system_host_keys: bool :param alt_host_keys: If `True` host keys will be loaded from the file specified in alt_key_file. :type alt_host_keys: bool :param alt_key_file: SSH host key file to use (if alt_host_keys=True). :type alt_key_file: str :param ssh_config_file: File name of OpenSSH configuration file. :type ssh_config_file: str :param timeout: Connection timeout. :type timeout: float :param session_timeout: Set a timeout for parallel requests. :type session_timeout: float :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response. :type auth_timeout: float :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko). :type banner_timeout: float :param keepalive: Send SSH keepalive packets at a specific interval, in seconds. Currently defaults to 0, for backwards compatibility (it will not attempt to keep the connection alive). :type keepalive: int :param default_enter: Character(s) to send to correspond to enter key (default:). :type default_enter: str
:param response_return: Character(s) to use in normalized return data to represent enter key (default:) :type response_return: str
:param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor to select smallest of global and specific. Sets default global_delay_factor to .1 (default: False) :type fast_cli: boolean :param session_log: File path or BufferedIOBase subclass object to write the session log to. :type session_log: str :param session_log_record_writes: The session log generally only records channel reads due to eliminate command duplication due to command echo. You can enable this if you want to record both channel reads and channel writes in the log (default: False). :type session_log_record_writes: boolean :param session_log_file_mode: "write" or "append" for session_log file mode (default: "write") :type session_log_file_mode: str :param allow_auto_change: Allow automatic configuration changes for terminal settings. (default: False) :type allow_auto_change: bool :param encoding: Encoding to be used when writing bytes to the output channel. (default: ascii) :type encoding: str :param sock: An open socket or socket-like object (such as a `.Channel`) to use for communication to the target host (default: None). :type sock: socket :param global_cmd_verify: Control whether command echo verification is enabled or disabled (default: None). Global attribute takes precedence over function `cmd_verify` argument. Value of `None` indicates to use function `cmd_verify` argument. :type global_cmd_verify: bool|None :param auto_connect: Control whether Netmiko automatically establishes the connection as part of the object creation (default: True). :type auto_connect: boolSource code
class HPProcurveSSH(HPProcurveBase): def session_preparation(self): """ Prepare the session after the connection has been established. """ # Procurve over SHH uses 'Press any key to continue' delay_factor = self.select_delay_factor(delay_factor=0) output = "" count = 1 while count <= 30: output += self.read_channel() if "any key to continue" in output: self.write_channel(self.RETURN) break else: time.sleep(0.33 * delay_factor) count += 1 # Try one last time to past "Press any key to continue self.write_channel(self.RETURN) super().session_preparation() def _build_ssh_client(self): """Allow passwordless authentication for HP devices being provisioned.""" # Create instance of SSHClient object. If no SSH keys and no password, then use noauth if not self.use_keys and not self.password: remote_conn_pre = SSHClient_noauth() else: remote_conn_pre = SSHClient() # Load host_keys for better SSH security if self.system_host_keys: remote_conn_pre.load_system_host_keys() if self.alt_host_keys and path.isfile(self.alt_key_file): remote_conn_pre.load_host_keys(self.alt_key_file) # Default is to automatically add untrusted hosts (make sure appropriate for your env) remote_conn_pre.set_missing_host_key_policy(self.key_policy) return remote_conn_preAncestors
Inherited members
HPProcurveBase:check_config_modecheck_enable_modecleanupclear_bufferclose_session_logcommitconfig_modedisable_pagingdisconnectenableestablish_connectionexit_config_modeexit_enable_modefind_promptis_alivenormalize_cmdnormalize_linefeedsopen_session_logparamiko_cleanupread_channelread_until_patternread_until_promptread_until_prompt_or_patternrun_ttpsave_configselect_delay_factorsend_commandsend_command_expectsend_command_timingsend_config_from_filesend_config_setsession_preparationset_base_promptset_terminal_widthspecial_login_handlerstrip_ansi_escape_codesstrip_backspacesstrip_commandstrip_prompttelnet_loginwrite_channel
class HPProcurveTelnet (ip='', host='', username='', password=None, secret='', port=None, device_type='', verbose=False, global_delay_factor=1, global_cmd_verify=None, use_keys=False, key_file=None, pkey=None, passphrase=None, allow_agent=False, ssh_strict=False, system_host_keys=False, alt_host_keys=False, alt_key_file='', ssh_config_file=None, conn_timeout=5, auth_timeout=None, banner_timeout=15, blocking_timeout=20, timeout=100, session_timeout=60, keepalive=0, default_enter=None, response_return=None, serial_settings=None, fast_cli=False, session_log=None, session_log_record_writes=False, session_log_file_mode='write', allow_auto_change=False, encoding='ascii', sock=None, auto_connect=True)-
Base Class for cisco-like behavior.
Initialize attributes for establishing connection to target device. :param ip: IP address of target device. Not required if `host` is provided. :type ip: str :param host: Hostname of target device. Not required if `ip` is provided. :type host: str :param username: Username to authenticate against target device if required. :type username: str :param password: Password to authenticate against target device if required. :type password: str :param secret: The enable password if target device requires one. :type secret: str :param port: The destination port used to connect to the target device. :type port: int or None :param device_type: Class selection based on device type. :type device_type: str :param verbose: Enable additional messages to standard output. :type verbose: bool :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1). :type global_delay_factor: int :param use_keys: Connect to target device using SSH keys. :type use_keys: bool :param key_file: Filename path of the SSH key file to use. :type key_file: str :param pkey: SSH key object to use. :type pkey: paramiko.PKey :param passphrase: Passphrase to use for encrypted key; password will be used for key decryption if not specified. :type passphrase: str :param allow_agent: Enable use of SSH key-agent. :type allow_agent: bool :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which means unknown SSH host keys will be accepted). :type ssh_strict: bool :param system_host_keys: Load host keys from the users known_hosts file. :type system_host_keys: bool :param alt_host_keys: If `True` host keys will be loaded from the file specified in alt_key_file. :type alt_host_keys: bool :param alt_key_file: SSH host key file to use (if alt_host_keys=True). :type alt_key_file: str :param ssh_config_file: File name of OpenSSH configuration file. :type ssh_config_file: str :param timeout: Connection timeout. :type timeout: float :param session_timeout: Set a timeout for parallel requests. :type session_timeout: float :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response. :type auth_timeout: float :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko). :type banner_timeout: float :param keepalive: Send SSH keepalive packets at a specific interval, in seconds. Currently defaults to 0, for backwards compatibility (it will not attempt to keep the connection alive). :type keepalive: int :param default_enter: Character(s) to send to correspond to enter key (default:). :type default_enter: str
:param response_return: Character(s) to use in normalized return data to represent enter key (default:) :type response_return: str
:param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor to select smallest of global and specific. Sets default global_delay_factor to .1 (default: False) :type fast_cli: boolean :param session_log: File path or BufferedIOBase subclass object to write the session log to. :type session_log: str :param session_log_record_writes: The session log generally only records channel reads due to eliminate command duplication due to command echo. You can enable this if you want to record both channel reads and channel writes in the log (default: False). :type session_log_record_writes: boolean :param session_log_file_mode: "write" or "append" for session_log file mode (default: "write") :type session_log_file_mode: str :param allow_auto_change: Allow automatic configuration changes for terminal settings. (default: False) :type allow_auto_change: bool :param encoding: Encoding to be used when writing bytes to the output channel. (default: ascii) :type encoding: str :param sock: An open socket or socket-like object (such as a `.Channel`) to use for communication to the target host (default: None). :type sock: socket :param global_cmd_verify: Control whether command echo verification is enabled or disabled (default: None). Global attribute takes precedence over function `cmd_verify` argument. Value of `None` indicates to use function `cmd_verify` argument. :type global_cmd_verify: bool|None :param auto_connect: Control whether Netmiko automatically establishes the connection as part of the object creation (default: True). :type auto_connect: boolSource code
class HPProcurveTelnet(HPProcurveBase): def telnet_login( self, pri_prompt_terminator="#", alt_prompt_terminator=">", username_pattern=r"Login Name:", pwd_pattern=r"assword", delay_factor=1, max_loops=60, ): """Telnet login: can be username/password or just password.""" super().telnet_login( pri_prompt_terminator=pri_prompt_terminator, alt_prompt_terminator=alt_prompt_terminator, username_pattern=username_pattern, pwd_pattern=pwd_pattern, delay_factor=delay_factor, max_loops=max_loops, )Ancestors
Methods
def telnet_login(self, pri_prompt_terminator='#', alt_prompt_terminator='>', username_pattern='Login Name:', pwd_pattern='assword', delay_factor=1, max_loops=60)-
Telnet login: can be username/password or just password.
Source code
def telnet_login( self, pri_prompt_terminator="#", alt_prompt_terminator=">", username_pattern=r"Login Name:", pwd_pattern=r"assword", delay_factor=1, max_loops=60, ): """Telnet login: can be username/password or just password.""" super().telnet_login( pri_prompt_terminator=pri_prompt_terminator, alt_prompt_terminator=alt_prompt_terminator, username_pattern=username_pattern, pwd_pattern=pwd_pattern, delay_factor=delay_factor, max_loops=max_loops, )
Inherited members
HPProcurveBase:check_config_modecheck_enable_modecleanupclear_bufferclose_session_logcommitconfig_modedisable_pagingdisconnectenableestablish_connectionexit_config_modeexit_enable_modefind_promptis_alivenormalize_cmdnormalize_linefeedsopen_session_logparamiko_cleanupread_channelread_until_patternread_until_promptread_until_prompt_or_patternrun_ttpsave_configselect_delay_factorsend_commandsend_command_expectsend_command_timingsend_config_from_filesend_config_setsession_preparationset_base_promptset_terminal_widthspecial_login_handlerstrip_ansi_escape_codesstrip_backspacesstrip_commandstrip_promptwrite_channel