na_ontap_net_ifgrp – NetApp Ontap modify network interface group

New in version 2.6.

Synopsis

  • Create, modify ports, destroy the network interface group

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward

  • Ansible 2.6

  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’

  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’

  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
distribution_function
-
    Choices:
  • mac
  • ip
  • sequential
  • port
Specifies the traffic distribution function for the ifgrp.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https
mode
-
Specifies the link policy for the ifgrp.
name
- / required
Specifies the interface group name.
node
- / required
Specifies the name of node.
ontapi
integer
The ontap api version to use
password
string / required
Password for the specified user.

aliases: pass
ports
-
added in 2.8
List of expected ports to be present in the interface group.
If a port is present in this list, but not on the target, it will be added.
If a port is not in the list, but present on the target, it will be removed.
Make sure the list contains all ports you want to see on the target.

aliases: port
state
-
    Choices:
  • present ←
  • absent
Whether the specified network interface group should exist or not.
use_rest
string
    Choices:
  • Never
  • Always
  • Auto ←
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
Always -- will always use the REST API
Never -- will always use the ZAPI
Auto -- will try to use the REST Api
username
string / required
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation
aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: create ifgrp
  na_ontap_net_ifgrp:
    state: present
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    distribution_function: ip
    name: a0c
    ports: [e0a]
    mode: multimode
    node: "{{ Vsim node name }}"
- name: modify ports in an ifgrp
  na_ontap_net_ifgrp:
    state: present
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    distribution_function: ip
    name: a0c
    port: [e0a, e0c]
    mode: multimode
    node: "{{ Vsim node name }}"
- name: delete ifgrp
  na_ontap_net_ifgrp:
    state: absent
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    name: a0c
    node: "{{ Vsim node name }}"

Status

Authors

Hint

If you notice any issues in this documentation, you can edit this document to improve it.