na_ontap_firmware_upgrade – NetApp ONTAP firmware upgrade for SP, shelf, ACP, and disk

New in version 2.9.

Synopsis

  • Update ONTAP service-prosessor firmware

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward

  • Ansible 2.6

  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’

  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’

  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
clear_logs
boolean
    Choices:
  • no
  • yes ←
Clear logs on the device after update. Default value is true
disk_fw
string
disk firmware to be updated to.
firmware_type
string
    Choices:
  • service-processor
  • shelf
  • acp
  • disk
Type of firmware to be upgraded. Options include shelf, ACP, service-processor, and disk.
For shelf firmware upgrade the operation is asynchronous, and therefore returns no errors that might occur during the download process.
Shelf firmware upgrade is idempotent if shelf_module_fw is provided .
disk firmware upgrade is idempotent if disk_fw is provided .
With check mode, SP, ACP, disk, and shelf firmware upgrade is not idempotent.
This operation will only update firmware on shelves/disk that do not have the latest firmware-revision.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https
install_baseline_image
boolean
    Choices:
  • no ←
  • yes
Install the version packaged with ONTAP if this parameter is set to true. Otherwise, package must be used to specify the package to install.
node
string / required
Node on which the device is located.
ontapi
integer
The ontap api version to use
package
string
Name of the package file containing the firmware to be installed. Not required when -baseline is true.
password
string / required
Password for the specified user.

aliases: pass
shelf_module_fw
string
Shelf module firmware to be updated to.
state
string
Default:
"present"
Whether the specified ONTAP firmware should be upgraded or not.
update_type
string
Type of firmware update to be performed. Options include serial_full, serial_differential, network_full.
use_rest
string
    Choices:
  • Never
  • Always
  • Auto ←
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
Always -- will always use the REST API
Never -- will always use the ZAPI
Auto -- will try to use the REST Api
username
string / required
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation
aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: SP firmware upgrade
  na_ontap_firmware_upgrade:
    state: present
    node: vsim1
    package: "{{ file name }}"
    clear_logs: True
    install_baseline_image: False
    update_type: serial_full
    firmware_type: service-processor
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
- name: ACP firmware upgrade
  na_ontap_firmware_upgrade:
    state: present
    node: vsim1
    firmware_type: acp
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
- name: shelf firmware upgrade
  na_ontap_firmware_upgrade:
    state: present
    firmware_type: shelf
    shelf_module_fw: 1221
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
- name: disk firmware upgrade
  na_ontap_firmware_upgrade:
    state: present
    firmware_type: disk
    disk_fw: NA02
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

Status

Authors

Hint

If you notice any issues in this documentation, you can edit this document to improve it.